
The case
In partnership with Rousseau Équipements, Dynas+ developed an optimization methodology to improve the performance of a bridge safety barrier compliant with the European standard EN1317. The goal was to automatically optimize the barrier geometry to meet the performance criteria of regulatory crash tests, then evaluate its robustness against manufacturing scatter, variations in material properties, and the uncertainties inherent in physical testing.
The solution deployed
Dynas+ developed a complete robust simulation-driven design chain based on the coupling between LS-DYNA, LS-OPT, and DEP MeshWorks. The methodology implemented includes:
- correlation of a numerical bridge barrier model with the results of full-scale crash tests;
- automatic generation of geometric variants through parametric morphing in DEP MeshWorks;
- optimization of the geometry using metamodels and LS-OPT;
- automation of the evaluation of the performance criteria defined by the EN1317 standard;
- a robustness analysis using the Monte Carlo method to identify the most influential parameters before the certification tests.

The results achieved
The developed methodology made it possible to implement a genuine robust design process applied to bridge barriers. The main results are:
- excellent correlation between the LS-DYNA simulations and the crash tests carried out on the device;
- a reduction in the computation time of a simulation from 45 hours to 14 hours thanks to optimization of the numerical model;
- automatic identification of a geometry improving the barrier's performance while meeting the requirements of the EN1317 standard;
- identification of the most sensitive material parameters through sensitivity analyses and Monte Carlo studies, making it possible to evaluate the reliability of the design before the certification tests.
This work was the subject of a scientific paper presented at the 12th European LS-DYNA Conference (Koblenz): "Vehicle Restraint System Optimization and Robustness Assessment using the Coupling between LS-DYNA, LS-OPT and DEP MeshWorks Software" (Clément Goubel, Jean-Yves Goulles, Teddy Maillot, Vincent Lapoujade, Matthieu Seulin, Nicolas Van Dorsselaer).



