Dynas+
ARUP head and leg models

FINITE ELEMENT MODELS

ARUP headform and legform models

Used at scale in pedestrian safety simulations and vehicle crash studies, the head and leg impact finite element models developed by ARUP help manufacturers meet Euro NCAP, UN R127, and European Regulation (EC) 631/2009 requirements.

Overview

ARUP headform and legform models at a glance

Headform models

Designed for the assessment of head injuries in occupant and pedestrian protection tests, they compute the Head Injury Criterion and other biomechanical indicators during impact simulations.

Upper legform

This model simulates upper-leg impacts. Used in Regulation (EC) 631/2009 and the Euro NCAP pedestrian protocol, it assesses the risks associated with contact with the hood edge or the upper bumper structure.

Lower legform

It represents impacts to the tibia and knee in pedestrian collisions, in accordance with document UNECE/TRANS/WP.29/GRSP/2013/26 Annex 4 and Euro NCAP protocol v8.4.

Key capabilities

The models in detail

  • 3.5 kg headform model, representing a child or small adult
  • 4.5 kg headform model, adult model for Euro NCAP and FMVSS compliance testing
  • Faithful reproduction of the geometry, mass, and impact behavior of the real devices
  • Upper legform model for thigh-level impacts
  • Lower legform model for tibia and knee impacts
  • Alignment with Euro NCAP, UN R127, and Regulation (EC) 631/2009 requirements
  • Purpose-built for LS-DYNA: solver contacts and material formulations
  • Continuous updates in line with test standards and biomechanical data

WHY

The value for your team

Developed from extensive experimental testing and correlated to real physical data, these models are used by manufacturers, suppliers, and regulatory bodies. They enable a detailed understanding of injury mechanisms, the optimization of vehicle front-end geometries, and reduced reliance on physical testing.

Let's discuss your project

Book a meeting with our simulation experts for a full audit

FAQ

A question?
We have the answer

Yes. They are developed specifically for LS-DYNA and compatible with its solver environment, contact definitions, and material formulations.

Yes. The head and leg models are validated and aligned with the Euro NCAP, UN R127, and Regulation (EC) 631/2009 protocols for pedestrian impact testing.

The upper leg model assesses thigh and pelvis injuries during an impact on the hood edge. The lower leg model analyzes knee and tibia injuries caused by impacts on the bumper.

No. They are not intended to replace physical testing but to complement it, enabling early virtual validation and optimization before certification testing.

Yes. ARUP continuously updates its models to reflect the latest testing standards, biomechanical data, and advances in material characterization.