
FAQ
Everything you need to know about Dynas+
The answers to the most frequently asked questions, all in one place
FAQ
Have a question? We have the answer
Problématique : Crash & sécurité passive
Simulation does not eliminate testing entirely, but it significantly reduces the number of tests by making design decisions more reliable early on. The remaining tests are used mainly for final validation and certification.
Most often this comes from model preparation, material laws, contact definition, or mesh quality. A stabilized methodology and validated models correct the majority of discrepancies.
Yes. Regulatory campaigns rely on validated dummy (ATD), barrier, and impactor models. These are available in versions included with LS-DYNA (LSTC) or in high-fidelity commercial versions (ARUP Cellbond).
Yes. Our engineers provide training, support, or studies to establish a repeatable methodology and make your teams self-sufficient.
Full-vehicle crash models are computationally demanding. We advise you on sizing, both locally and on an HPC cluster, and can support you with the infrastructure.
Problématique : Par où commencer
Yes. Numerical simulation is no longer reserved for large corporations. Solutions like Ansys Discovery and Ansys Mechanical allow SMEs and mid-sized companies to gradually integrate simulation into their development processes, starting with the most common challenges.
No. Modern tools make it possible to run your first simulations without being a specialist in numerical mechanics. However, obtaining reliable results requires a solid understanding of the analysis assumptions and the physics of the problem: this is why methodological support is often decisive during the first projects.
That depends above all on your objectives. To quickly evaluate several concepts from the design phase onward, Ansys Discovery is an excellent entry point. For more advanced structural analyses, complex materials, or results intended to validate your designs, Ansys Mechanical is the reference. Our engineers help you choose the solution best suited to your context, without over-sizing your investment.
First results can be obtained within a few days on simple cases. With appropriate training and a first supported project, most teams quickly become self-sufficient on their everyday applications.
Yes. This is one of the main advantages of the Ansys platform. You can start with structural simulations and then gradually add other physics (thermal, fluid dynamics, electromagnetics, fatigue, optimization) while keeping a consistent working environment.
Our engineers are involved at every stage of the project: analyzing your needs, selecting software, training users, supporting the first projects, and providing technical assistance whenever you need it. The goal is to make you self-sufficient as quickly as possible while securing your first investments in simulation.
FAQ
Absolutely. You can test our solutions in your own environments with a free evaluation license, along with technical support if needed.
Request your trial license now
Our solutions are used across many industries: automotive, aerospace, energy, defense, consumer goods, and more. Thanks to our multiphysics approach and our simulation expertise, we tailor our services to your specific constraints.
Yes. Dynas+ is a Qualiopi-certified organization that offers professional training, either from a catalog or fully customized, tailored to each client's skill level and business challenges. These programs can be built into skill-development paths or used to strengthen R&D teams.
We can step in quickly to assist you, carry out a study, or provide guidance. Our team of engineers is available to build a solution tailored to your needs.
Dynas+ specializes in advanced numerical simulation (CAE/FEA). We combine distribution of the Ansys suite with expert technical support, training, engineering studies, and custom development.
Solutions
No. Dynas+ offers an open portfolio combining ANSYS solutions with specialized tools developed by partners such as ARUP Oasys or DEP.
Yes. The Dynas+ teams have strong expertise in multiphysics couplings involving structures, fluids, thermal, and electromagnetics.
Yes. Dynas+ provides technical support, user training, methodological guidance, and workflow integration.
Yes. The solutions distributed by Dynas+ are optimized for multicore, cluster, and GPU HPC environments.
Yes. Our teams use these tools daily as part of engineering and design-office projects.
Structures
ANSYS Mechanical is ideal for static and mildly nonlinear analyses, whereas LS-DYNA is better suited to strongly nonlinear, transient, and multiphysics phenomena (crash, impact, forming, and so on).
Yes. All ANSYS structural solutions are interoperable through the ANSYS Workbench and Electronics Desktop environments.
Yes. ANSYS Forming is built on the LS-DYNA solver, with a dedicated interface optimized for forming and manufacturing specialists.
Absolutely. ANSYS Mechanical can be coupled with nCode DesignLife and Sherlock for a complete durability and reliability assessment.
Yes. Dynas+ provides full support, from installation to advanced training, as well as the integration of co-simulations and multiphysics workflows.
Fluides
Fluent is a versatile CFD solver suited to a wide variety of industrial applications, whereas CFX is more specialized in modeling flows in turbomachinery and rotating systems.
Absolutely. ANSYS Rocky can be efficiently coupled with Fluent or CFX to simulate particularly complex fluid-particle interactions. For less demanding flows, however, Rocky includes its own fluid solver (SPH method) with especially fast computation times.
Of course, and it is even recommended! ANSYS Forte and Chemkin make it possible to model chemical and combustion phenomena in interaction with the flows.
In general, the vast majority of fluid and thermal needs can be handled with Fluent. For more specific applications, the Dynas+ teams are here to advise you and steer you toward the most suitable solution.
Yes, and it is very much part of our role: Dynas+ provides comprehensive support, from installation to advanced training. Day to day, our technical support, recognized for its responsiveness and expertise, answers your questions and assists you in using the ANSYS Fluids tools.
Renowned for its performance in crash and fast dynamics simulation, LS-DYNA is now a multiphysics platform that integrates several specialized fluid solvers (ICFD, CESE, CPG, ALE). Its strength lies in a fully integrated computing architecture: the different solvers coexist within a single code and share a single model in core memory. They exchange physical information directly, with equilibrium iterations enabling strong fluid-structure coupling, without external co-simulation interfaces.
This approach is particularly well suited to strongly interdependent interactions between fluids and structures, especially in the presence of large deformations and highly nonlinear behavior. It thus opens up exceptional possibilities in multiphysics simulation, from parachute deployment to the modeling of heart valves and blood circulation, and more generally for any complex fluid-structure interaction involving large deformations.
Matériaux
GRANTA MI is an enterprise materials data management platform, whereas GRANTA Selector is a tool for supporting material selection and comparison.
Yes. Material data stored in GRANTA MI can be used directly in ANSYS simulations, ensuring consistency of material properties.
Yes. GRANTA MI makes it possible to store, structure, and analyze data from material tests and experimental campaigns.
Yes. GRANTA Selector makes it possible to incorporate criteria such as carbon footprint, recyclability, or environmental impact into material selection.
Optimisation
ANSYS optiSLang is a general-purpose multiphysics optimization solution that can be used with the vast majority of ANSYS tools, whereas LS-OPT is designed more specifically for LS-DYNA simulations.
ANSYS Minerva lets you structure, automate, and manage simulation workflows while ensuring data traceability and knowledge capture.
LS-TaSC specializes in topology optimization and stands out for its ability to handle nonlinear problems, both implicit and explicit, relying directly on the LS-DYNA solver. It thus makes it possible to explore new structural architectures, particularly for complex crash and impact applications. LS-OPT and optiSLang are more oriented toward parametric exploration and optimization, with complementary features such as sensitivity analysis, metamodeling, and robust optimization.
Absolutely. ANSYS optiSLang and ANSYS Minerva integrate directly into the ANSYS ecosystem and let you connect different simulation tools.
Of course. Dynas+ offers complete support in optimization and SPDM: choice of methodologies, setup of optimization workflows, simulation automation, solution deployment, training, and technical support. A large share of these tools is used daily by the engineers in our engineering department, allowing us to share concrete, proven expertise.
Premiers pas (parcours)
We assess your needs and context, choose the right tool, such as DEP MeshWorks or the Oasys suite, then train you on cases close to yours. The goal: make you autonomous and productive within a few weeks.
No. Our engineers support you from tool selection to hands-on use, with training tailored to your level and your projects.
We start from your challenges (type of physics, goals, budget) to recommend the most relevant tool, without over-sizing your investment.
Usually a few weeks: targeted training, support on your first cases, and help whenever you need it.
Pré / Post-processing
No. Dynas+ distributes both ANSYS solutions and specialized tools developed by third-party vendors such as ARUP Oasys or DEP.
EnSight is especially well suited to large models and complex CFD simulations that require advanced visualization capabilities, as well as photorealistic rendering.
Yes. The vast majority of these tools are used with LS-DYNA, and several solutions are specifically dedicated to it, notably LS-PrePost and the Oasys suite.
Thanks to breakthrough technologies and advanced modification tools, DEP MeshWorks radically simplifies the creation and evolution of finite element models. From meshing to Full Model Morphing, including the addition of features and the improvement of existing meshes, it saves a considerable amount of time while keeping you in control of your models.
Of course. Dynas+ offers technical support, training, and integration services for all of the pre- and post-processing solutions. Most of these tools are used daily by the engineers in our engineering department, ensuring support grounded in hands-on expertise and an in-depth understanding of simulation challenges.
The ARUP Oasys suite stands out for its built-in domain expertise, drawn from the experience of Arup engineers in LS-DYNA simulation. Beyond conventional pre- and post-processing features, it offers specialized tools for checking, modifying, and analyzing models, which improves simulation quality while reducing the time spent on preparation and results analysis.
Électronique
ANSYS HFSS is used for high-frequency applications (RF and microwave), whereas ANSYS Maxwell is dedicated to low-frequency electromagnetic phenomena, particularly in electric machines.
Absolutely. The ANSYS Electronics tools make it possible to couple EM simulations with ANSYS Icepak in order to analyze thermal effects on electronic performance.
No. ANSYS Motor-CAD is a fast tool for the system-level design of electric machines, whereas ANSYS Maxwell provides detailed finite-element electromagnetic analysis.
Yes. The solutions integrate within the ANSYS Electronics Desktop environment, making it possible to combine ANSYS HFSS, ANSYS Maxwell, ANSYS Icepak, and ANSYS SIwave in a single workflow.
Yes, this is absolutely part of our role: Dynas+ provides complete support, from installation to advanced training. On a day-to-day basis, our technical support team, recognized for its responsiveness and expertise, will always be there to answer your questions and assist you in using the Ansys Electronics tools.
Historically renowned for its performance in crash and fast dynamics simulation, Ansys LS-DYNA also includes a low-frequency electromagnetic solver based in particular on a hybrid FEM/BEM approach, which makes it possible to model electromagnetic fields without meshing the surrounding air.
Its main strength lies in its fully integrated multiphysics architecture: the electromagnetic, thermal, and mechanical solvers coexist within a single code and share a single model in core memory. They exchange physical information directly, enabling strong couplings between electromagnetic forces, heating, and structural deformations, without external co-simulation interfaces.
This approach opens up exceptional possibilities for complex multiphysics simulations, particularly in the presence of large deformations: electromagnetic forming and welding, induction heating, or interactions between electromagnetic fields and moving or deformable structures.
Développer mes activités (parcours)
We identify new needs (physics, volumes, accuracy), complete your toolchain, and upskill your teams.
Yes. We cover structures, fluids/CFD, electronics/EM, materials, optimization… and we help you integrate these new capabilities into your projects.
Model optimization, automation of repetitive tasks, HPC: we adapt your tools and methods to go faster.
High-level, fast and relevant technical support, provided by the engineers who run studies every day.
Externaliser ma simulation (parcours)
Protecting our clients’ data is one of our top priorities. We commit legally by signing an NDA with our clients and maintain advanced security across our IT infrastructure to guarantee the confidentiality of all information.
A study report covering the assumptions, the modeling choices, the list of analyses and their results, the post-processing curves, our interpretations and recommendations, as well as the models. A debrief meeting can also be held to present the conclusions to you live.
Absolutely. You own the study data and can reuse everything in-house for related work. In addition to the study report, we always provide clients with the numerical models used for the simulations.
The price depends on several factors, such as the complexity of the simulations to run, the size of the models, the data available at the start, and the volume of analyses to carry out.
Our turnaround times depend heavily on our current workload. The diversity and complementarity of our engineers let us stay agile and find solutions even under tight scheduling constraints.
Modèles EF
Yes. Models developed by LSTC / ANSYS are available free of charge to users with a valid LS-DYNA license.
No. The ARUP Cellbond models are distributed under a commercial license with documentation, support, and updates.
These models are specifically developed and validated for LS-DYNA.
The LSTC / ANSYS models are provided to LS-DYNA users for standard workflows, whereas the ARUP Cellbond models offer high-fidelity commercial models with advanced validation and dedicated support.
Yes. Dynas+ supports teams with: selecting the models, integrating them into LS-DYNA workflows, training, technical support, and setting up crash and safety methodologies.
Optics and photonics
Ansys Lumerical is a software suite dedicated to photonic simulation, covering light propagation, optical components, optoelectronic devices and integrated photonic circuits. Its modules provide complementary capabilities: FDTD for electromagnetic simulation, MODE for waveguide analysis, Multiphysics for optical, electrical and thermal couplings, and INTERCONNECT for the design of photonic integrated circuits (PICs).
This complementarity makes it possible to simulate and optimize photonic devices, from the nanoscale to complex integrated circuits.
Yes. ANSYS Optics solutions can be used together within a single project, for example by combining Lumerical for photonic component design, Zemax OpticStudio for optical system development and Speos for evaluating them in a realistic environment. The available exchange and coupling options depend on the software and the workflow chosen.
Yes. The ANSYS portfolio supports multiphysics analyses that, depending on the tools, include the effects of temperature, mechanical deformation and material properties on optical or photonic performance.
The solutions cover many fields: automotive lighting and signaling, cameras and sensors, LiDAR, imaging systems, medical devices, optical telecommunications, integrated photonics and nanophotonic components.
The choice mainly depends on the scale of the problem, the physics to be modeled and the performance you are targeting. Zemax OpticStudio addresses optical system design needs, Speos covers their simulation in realistic environments, and Lumerical handles the analysis of photonic components and circuits. Dynas+ engineers can help you analyze your needs and select the solutions best suited to your applications.
LS-DYNA
No. Historically recognized as a global reference for crash and impact, LS-DYNA is now a multiphysics simulation platform covering a very wide range of applications: static and dynamic mechanical analyses, forming, thermal analysis, fluid mechanics, electromagnetism and complex multiphysics interactions.
The explicit solver is particularly suited to fast, highly nonlinear dynamic phenomena, while the implicit solver covers static, quasi-static, vibration and dynamic analyses. Integrated in a single code, they make it possible to switch directly from one method to the other, notably to efficiently initialize an explicit simulation with an implicit calculation, then handle springback or the settling of the structure after the dynamic event.
LS-DYNA has a particularly rich library of damage and failure models, suited to metals, composites, ceramics, concretes and other complex materials. These models reproduce damage initiation and propagation, the degradation of mechanical properties and failure, including through element erosion or deletion.
LS-DYNA is built on a unique architecture bringing together the mechanical, fluid, thermal and electromagnetic solvers within a single code sharing a common data structure. This native integration enables strong, direct couplings between the different physics, without external co-simulation interfaces, delivering exceptional performance and robustness for complex multiphysics simulations.
No. LS-DYNA is not split into functional modules: a single license gives access to all of its mechanical, thermal, fluid and electromagnetic capabilities. You can therefore diversify your analyses without purchasing additional modules, as license needs depend mainly on the computing resources used.
Yes. Thanks to its SMP, MPP and hybrid parallelization technologies, LS-DYNA offers excellent scalability, demonstrated up to several thousand compute cores. It can handle models of several million to several tens of millions of elements on workstations, HPC clusters and supercomputers.
Dynas+ offers a catalog of more than 40 training courses dedicated to LS-DYNA and its ecosystem, covering both the fundamentals and the most advanced features: explicit and implicit dynamics, materials, contacts, ALE and SPH methods, multiphysics, pre- and post-processing, and optimization. Delivered by experienced Dynas+ engineers or associated international experts, these courses offer a complete path from introduction to expertise, enabling a genuine transfer of skills and know-how to support users toward in-depth mastery of the software.
LS-PrePost
LS-PrePost is optimized for LS-DYNA. Some general functions such as geometry visualization or mesh inspection can be used more broadly, but the advanced features are exclusively dedicated to LS-DYNA formats.
Yes. LS-PrePost is designed to efficiently handle complex, detailed, high-resolution models, including full-vehicle simulations.
Yes. The interface lets you interactively define contacts, materials, boundary conditions, initial velocities, and loads, all in LS-DYNA keyword format.
Yes. LS-PrePost offers a scriptable interface to automate post-processing, meshing, or model manipulation through command files.
LS-PrePost is available on Windows and Linux and can be downloaded free of charge from the official LS-DYNA distribution network.
LS-OPT
No. While it is fully integrated with LS-DYNA, LS-OPT can also interact with other solvers such as Ansys, part of Synopsys, MATLAB, or custom codes through scripting interfaces.
LS-OPT supports linear and nonlinear optimization, with or without constraints, single- or multi-objective. It is well suited to studies in crash, forming, fatigue, thermal, or manufacturing processes.
Yes. LS-OPT is widely used for inverse parameter identification, particularly for calibrating complex constitutive laws in LS-DYNA. It automatically adjusts material coefficients to match simulation results with experimental data.
Yes. LS-OPT incorporates stochastic methods and RBDO approaches, making it possible to assess design robustness against real-world variability.
Yes. The interface and guided workflows make it easy to set up DOE studies, build response surfaces, and run optimizations, even without advanced optimization expertise.
LS-Run
Yes. LS-Run is specifically designed for LS-DYNA workflows. It is not compatible with other solvers, which allows it to be optimized for the performance and stability of this environment.
Yes. LS-Run is well suited to batch simulations, parameter variations, and robustness studies. It allows materials, geometries, boundary conditions, or solver options to be varied across multiple runs.
Yes. LS-Run is compatible with distributed computing environments and queue managers such as Slurm or LSF, with resource configuration and parallel execution.
Through its graphical interface, template reuse, and automation of repetitive tasks, LS-Run reduces human error and setup time.
Yes. LS-Run integrates with LS-OPT and LS-TaSC to drive optimization loops and multiphysics computation campaigns. It acts as the execution engine for these workflows.
LS-TaSC
Yes. LS-TaSC supports both the explicit and implicit LS-DYNA solvers, making it suitable for scenarios such as crash analysis, forming, or quasi-static loading.
Yes. It is possible to define multiple load cases and multi-objective criteria, for example minimizing mass while maximizing stiffness or energy-absorption capacity.
Yes. LS-TaSC includes manufacturability filters, allowing optimization to be guided toward feasible, production-ready shapes.
Yes. LS-TaSC is particularly effective in the early design phase, where rapid exploration of topological variants helps reduce development times and improve design quality.
Working directly on nonlinear LS-DYNA simulations makes it possible to capture large deformations, contacts, and material failure during optimization, which approaches based on simplified linear models cannot do.
Ansys Additive Solutions
Several metal processes, in particular laser powder bed fusion (LPBF), directed energy deposition (DED), and binder jetting.
Yes. The software includes tools for automatically optimizing orientation and supports, balancing mechanical strength, print time, and ease of post-processing.
Thermomechanical simulation predicts distortion, stress, and deformation, then automatically applies geometric compensation to produce parts that meet the expected tolerances.
Yes. Ansys Additive Solutions integrates with Ansys Workbench, Ansys Mechanical, SpaceClaim, and the leading manufacturing preparation platforms.
Yes. It is used in qualification and certification processes to validate print strategies and meet the reliability and compliance requirements of industry authorities.
Ansys Discovery
No. Discovery is designed for real-time simulation during early-stage design. Detailed, high-fidelity validations are performed in Ansys Mechanical for structures and in Ansys Fluent for CFD, to which the models transfer directly.
Static structural, thermal, and modal analyses, as well as internal and external flows in steady-state and transient regimes. Discovery also supports multiphysics scenarios such as coupled fluid-structure heat transfer, allowing you to explore overall system behavior very early on.
The GPU-accelerated solvers deliver physically consistent results well suited to guiding design decisions. For detailed validation or certification-grade accuracy, models are transferred to the high-fidelity solvers.
No. Discovery is designed for designers and engineers without simulation expertise. Its guided workflows and instant visualization make simulation accessible.
The solver is fully GPU-accelerated, providing near-instant feedback as you make design changes. Discovery can run on a CPU-only system, but a modern graphics card is strongly recommended.
Ansys Forming
Primarily automotive, aerospace, and home appliances, but any industry that uses sheet-metal stamped parts can benefit from it.
No. The guided interface hides the solver's complexity: no scripting skills are required. Advanced users can still access LS-DYNA's advanced control options.
Yes. Ansys Forming supports multi-stage processes, including trimming, restrike, flanging, and hemming, with full sequencing and tool compensation.
Yes. The solver supports advanced material models: anisotropy, strain-rate effects, and temperature effects, for reliable formability prediction.
Ansys Forming includes springback analysis and tool-surface compensation tools, making it possible to iteratively correct geometries and reduce the gaps between part and tool.
Ansys Mechanical
Yes. Ansys Mechanical supports linear, small-deformation analyses as well as nonlinear analyses involving large deformations, contact, and plasticity.
Metals, plastics, composites, elastomers, and foams, as well as custom behaviors through user-defined material laws.
Yes. It includes full support for modal, harmonic, transient dynamic, and response-spectrum analyses, including for prestressed and nonlinear structures.
Yes. Ansys Mechanical enables coupled thermo-mechanical analyses, accounting for heat transfer, temperature-dependent materials, and thermal contact.
Yes. The built-in tools support topology, shape, and parametric optimization. They can be complemented by Ansys optiSLang for design of experiments and response-surface models.
It is HPC-compatible and optimized for parallel computing, on both multi-core workstations and clusters.
Ansys Motion
Yes. Ansys Motion handles large assemblies with thousands of joints and contacts, while maintaining high accuracy and good computational efficiency.
Yes. Ansys Motion integrates with Ansys Mechanical for structural co-simulation and supports the integration of control systems.
Yes. It makes it possible to assess vibrations and system durability from the earliest design phases.
Yes. Ansys Motion supports control-system co-simulation, making it well suited to the validation of mechatronic systems.
Incorporating flexible-body deformation, contact, and multiphysics coupling into a single platform makes it possible to capture behaviors that rigid-body-only approaches cannot reproduce.
Ansys nCode DesignLife
High-cycle and low-cycle fatigue, thermo-mechanical fatigue, as well as multiaxial and vibration fatigue, for realistic loading scenarios.
Ansys nCode DesignLife reads stress and strain results directly from Ansys Mechanical or Ansys Workbench, automating fatigue analysis within the existing workflow.
Yes. The software accounts for variable-amplitude loading, real test data, and measured strain histories.
Yes. It includes a comprehensive library of fatigue properties, covering metals, composites, and advanced materials.
Yes. It is used in the automotive, aerospace, and energy sectors, where fatigue, safety, and certified durability are essential design criteria.
Ansys Sherlock
It can greatly reduce physical testing by providing an early predictive view of how your electronic boards will actually behave. Qualification testing remains defined by your requirements and standards.
Yes. Ansys Sherlock supports the leading ECAD formats on the market and automatically maps materials and components from your bill of materials.
Ansys Sherlock connects to Ansys Icepak for thermal analysis, to Ansys Mechanical for structural simulation, and to LS-DYNA for shock and drop testing, delivering a complete multiphysics simulation chain.
Yes. Ansys Sherlock is used in applications with high reliability requirements, where life prediction, fatigue, and safety are essential to certification and long-term robustness.
Automatically converting design data into detailed mechanical and thermal models eliminates a lengthy, error-prone manual modeling step.
Ansys CFX
Ansys Fluent is a versatile CFD platform covering a wide range of applications. Ansys CFX is designed for turbomachinery and delivers greater stability and convergence for rotating simulations and multiple-reference-frame models.
Gas and steam turbines, centrifugal pumps, axial and radial compressors, fans, and industrial cooling systems.
Yes. It supports both steady-state and transient analyses, enabling the study of unsteady phenomena, blade-passing effects, and rotor-stator interactions.
Yes. Through Ansys Workbench, it can be coupled with structural analysis, electromagnetics, or Ansys Fluent for thermo-structural, acoustic, or electromagnetic analyses.
Yes. It offers strong parallel scalability and computational efficiency suited to large, complex rotating-system simulations.
Ansys Chemkin
Ansys Chemkin focuses on chemical kinetics and reaction-mechanism modeling, whereas a CFD solver focuses on fluid dynamics. It can then be coupled with Ansys Fluent or Ansys Forte for multiphysics reacting-flow simulations.
Gas-phase, liquid-phase, and surface chemistry, including combustion, oxidation, pyrolysis, and catalytic reactions.
Reaction mechanisms validated in Ansys Chemkin can be exported directly, ensuring complete chemical consistency in reacting-flow simulations.
Yes. It includes validated mechanisms for hydrogen, ammonia, biofuels, and synthetic fuels, supporting low-carbon combustion approaches.
The solvers are optimized for speed and stability, even with detailed mechanisms containing thousands of reactions.
Ansys FENSAP-ICE
Supercooled droplet impingement, ice-crystal accretion, liquid films and runback, as well as ice melting and shedding, covering both rime (dry) and glaze (wet) icing regimes.
It is a CFD module specialized in aircraft icing, incorporating physical models dedicated to ice formation, ice growth, and validation against certification standards. It complements Ansys Fluent in this domain.
Yes. It handles full three-dimensional simulations on geometries such as wings, engine nacelles, rotor blades, and measurement probes.
Yes. It is used by the FAA and EASA authorities, as well as by major manufacturers, for analyses and design validation toward icing-protection certifications.
Yes. It can simulate thermal and fluidic de-icing systems, evaluating heat transfer, liquid-film behavior, and energy efficiency.
Ansys Fluent
Aerospace, automotive, energy, chemicals, HVAC, electronics cooling, and manufacturing, for any application involving fluid flow or heat transfer.
It offers the RANS, LES, and DES approaches, up to very high-fidelity research-grade analyses.
Yes. It natively handles coupled fluid-solid heat transfer and integrates with the other tools in the suite for fluid-structure interaction, combustion and complex chemical reactions, or electromagnetic coupling.
Yes. It includes parametric analysis tools, automated meshing with Fluent Meshing, and a direct connection to Ansys Workbench and Ansys optiSLang for optimization and design exploration.
Ansys Fluent is optimized for high-performance computing and scales across hundreds or even thousands of cores to handle very large CFD models.
Ansys Forte
All the main combustion concepts: diesel, direct- or indirect-injection gasoline, natural gas, hydrogen, and hybrid modes such as HCCI and PCCI, for automotive, aerospace, and energy applications.
Yes. The software simulates complete transient combustion events, including spark ignition, auto-ignition, and cycle-to-cycle variations.
Ansys Forte is connected to Ansys Chemkin-Pro for chemistry, to Ansys Fluent for flow refinement, and to structural analysis for thermo-structural coupling.
Because combustion is a complex phenomenon, the computations are intensive. Ansys Forte benefits from high-performance solvers, advanced parallelization, and HPC compatibility that reduce computation times.
Dedicated models for injection, evaporation, and ignition, combined with detailed chemical kinetics coupled directly to the CFD, for accurate emissions prediction.
Ansys Rocky
Yes. It includes models for particle breakage, shape deformation, and wear, making it possible to predict material degradation and changes in particle size.
Through coupling with Ansys Fluent, Ansys Rocky runs CFD-DEM co-simulations that capture drag, buoyancy, and heat exchange between fluid and particles.
Mining, agriculture, pharmaceutical manufacturing, process chemistry, and energy, for any process involving granular flow or powder handling.
Leveraging the GPU makes it possible to efficiently process sets of several million particles, and therefore to simulate larger, more realistic systems than on a CPU-only architecture.
Yes. FEA-DEM coupling makes it possible to study structure-particle interactions, such as wear or the loads exerted on material-handling equipment.
Ansys Thermal Desktop
Ansys Thermal Desktop uses SINDA/FLUINT as its main solver for thermal and fluid networks. This combination pairs the flexibility of system-level modeling with the 3D accuracy of finite elements.
Conduction, convection, and radiation, including complex radiative coupling between surfaces and environmental effects such as solar radiation and vacuum conditions. Typical uses are electronics cooling, spacecraft thermal control, battery thermal management, heat-exchanger design, and environmental studies, across aerospace, electronics, automotive, energy, and industry.
Yes. It integrates with structural analysis for thermo-structural studies and with Ansys Fluent for fluid heat-transfer calculations, forming a complete multiphysics simulation chain.
Yes. Ansys Thermal Desktop includes tools for radiation, orbital heat exchange, and spacecraft energy balance.
Yes. It supports steady-state and transient analyses, to determine how temperatures vary over time, startup conditions, and dissipation cycles. It supports high-performance computing across a large number of cores.
Ansys HFSS
Antennas, filters, waveguides, connectors, electronic boards, and integrated-circuit packages, for applications ranging from 5G and radar to satellite communications and autonomous systems.
Ansys HFSS solves Maxwell's equations with solvers validated experimentally through years of field experience, delivering a level of accuracy used in certification contexts by major manufacturers and research institutes.
Yes. It supports high-performance computing and adaptive meshing, making it possible to simulate large-array antennas, multilayer boards, or detailed 3D geometries.
Yes. Ansys HFSS is part of Ansys Electronics Desktop and integrates with Ansys Maxwell, Ansys Icepak, and structural analysis for coupled electromagnetic, thermal, and structural studies.
Yes. Ansys HFSS makes it possible to identify, analyze, and reduce electromagnetic interference, with a view to compliance with international standards.
Ansys HFSS-IC
Ansys HFSS-IC extends the capabilities of Ansys HFSS with tools specific to the design of integrated circuits, packages, and interconnects, along with dedicated features for signal integrity and power integrity analysis.
Yes. It supports a hierarchical workflow, making it possible to simulate integrated circuits, packages, and boards separately or together.
Yes. Ansys HFSS-IC is integrated with Ansys Q3D Extractor, making it possible to extract the RLC parameters needed to model delays, losses, and electromagnetic coupling.
Yes. It connects to Ansys Icepak for thermal management and to structural analysis for structural studies.
Yes. Its HPC compatibility and distributed solvers make it possible to simulate large-scale integrated circuits, packages, and electronic systems.
Ansys Icepak
Electronic boards, power modules, LED systems, automotive electronics, batteries, and servers, at both the component level and the full-system level.
Ansys Icepak is a CFD-based electronics cooling tool designed for the thermal modeling of electronic equipment. It relies on the Fluent solver and offers dedicated features: component libraries, fan curves, board materials, and simplified models to speed up studies.
Yes. Ansys Icepak couples with Ansys Maxwell and structural analysis to simulate electrical losses, heat generation, and thermal deformation.
Yes. It models air, liquid, or hybrid systems, including heat pipes, cold plates, and vapor chambers, for high-power or high-density components.
Yes. Ansys Icepak supports both steady-state and transient analyses, to study the dynamic evolution of temperature and optimize thermal control strategies.
Yes. Thanks to parallel computing, it handles models comprising millions of elements.
Ansys Maxwell
Low-frequency electromechanical systems: motors, generators, actuators, transformers, inductors, and magnetic sensors, in both 2D and 3D.
Ansys HFSS is dedicated to high-frequency phenomena: wave propagation, radiation, and antennas. Ansys Maxwell focuses on low-frequency phenomena dominated by inductive and conductive effects, which corresponds to the design of electromechanical devices.
Yes. Ansys Maxwell supports transient time-domain analyses, to study motor startup, magnetic saturation, or electrical switching.
Yes. It integrates with structural analysis and electronics thermal management for electro-thermal and magneto-structural studies.
Yes. It interfaces with Ansys Circuit Designer for electromagnetic and circuit co-simulation, incorporating the interactions between components, controls, and magnetic fields.
Ansys Motor-CAD
A wide range of machines: permanent-magnet synchronous motors, induction motors, switched reluctance motors, DC motors, brushless motors, and axial-flux machines.
Ansys Maxwell performs detailed electromagnetic finite element analyses. Ansys Motor-CAD focuses on rapid system-level design by integrating electromagnetic, thermal, and mechanical aspects, which corresponds to early-stage architecture optimization.
Yes. Ansys Motor-CAD includes a dedicated thermal solver capable of modeling conduction, convection, and air, liquid, or hybrid cooling systems.
Yes. It integrates with Ansys Maxwell, structural analysis, and CFD for electro-thermo-mechanical co-simulations.
Yes. It is widely used for the design of electric and hybrid motors, to optimize efficiency, torque, cooling, and integration into powertrains.
Ansys SIwave
Yes. It is designed to study signal paths and power distribution networks simultaneously, in order to optimize electrical stability and reduce noise.
It includes tools for predicting and mitigating EMI, making it possible to simulate radiated and conducted emissions from the design stage onward, with a view to meeting EMC standards.
Yes. It connects to Ansys HFSS for high-frequency simulation, to Ansys Q3D Extractor for parasitic extraction, and to Ansys Icepak for thermal co-simulation.
Yes. Its solvers make it possible to simulate high-density boards with thousands of vias and nets.
Combining full-wave electromagnetic simulation with signal and power integrity analysis provides insight into the real behavior of high-speed boards that approaches based on simplified equivalent circuits cannot reproduce.
Ansys Granta MI
To centralize and structure materials data on a secure platform, ensuring consistency in materials choices and supporting technical decision-making across the enterprise.
Yes. Ansys Granta MI integrates with the simulation tools in the suite as well as with PLM and ERP systems, so that validated data flows through design and production processes.
It offers modules for assessing environmental impact, recyclability, and carbon footprint, and makes it possible to track compliance with regulations such as REACH, RoHS, and ELV.
Yes. Ansys Granta MI is scalable: it can be used by a small R&D team or deployed at large scale for multi-site collaboration and centralized governance.
Mechanical, thermal, electrical, and environmental properties, as well as process data, test results, supplier histories, and regulatory information, all with full traceability.
Ansys Granta Selector
Ansys Granta MI is used to manage and centralize materials data across the enterprise. Ansys Granta Selector is an interactive exploration and selection tool that helps identify the most suitable materials based on validated data and multiple criteria.
A wide range: metals, polymers, composites, ceramics, foams, and natural materials, with thousands of datasets drawn from international sources and standards.
Yes. The software incorporates carbon footprint, recyclability, energy consumption, and life-cycle impact.
Yes. Materials data can be exported directly to the simulation software in the suite, ensuring consistency of the properties used in finite element and CFD calculations.
Yes. Teams can share their selections, analyses, and comparison charts, ensuring consistency and traceability of materials choices.
Ansys optiSLang
It connects directly to structural analysis, CFD, and electronics tools, ensuring full process automation and bidirectional data exchange between simulation environments.
Single-objective, multi-objective, and multiphysics optimization, to manage trade-offs among performance, cost, mass, or efficiency.
Yes. It incorporates uncertainty quantification and robust optimization tools, for reliable designs even in the presence of manufacturing variations or real-world operating conditions.
Yes. It integrates with external software such as MATLAB, Excel, or Python, or any other tool via custom scripts, making it well suited to multi-vendor workflows.
By automating repetitive simulations, managing workflows, and building surrogate models, it makes it possible to explore more design variants in less time.
Ansys Minerva
A PLM system manages product data and documentation. Ansys Minerva focuses on simulation data and processes, capturing the full context of the models, parameters, results, and workflows associated with design and validation.
Yes. Ansys Minerva integrates with PLM, ERP, and MES systems as well as the simulation tools in the suite, for digital continuity across the product life cycle.
Through secure role-based access, a centralized data repository, and real-time collaboration tools that can be used on site as well as remotely.
Yes. Ansys Minerva includes workflow automation and process management features to standardize practices and ensure reproducible, traceable results.
Yes. Its modular architecture adapts to large groups as well as smaller R&D teams.
Ansys Workbench
Yes. Ansys Workbench integrates with the leading CAD software on the market as well as with neutral formats such as STEP, IGES, and Parasolid.
Tetrahedral, hexahedral, swept, or surface meshes, automatically or manually, tailored to accuracy requirements and to the different physical domains.
Yes. Ansys Workbench makes it easy to couple structural, thermal, fluid, and electromagnetic analyses within a single environment.
Yes. It includes parametric and scripting tools to automate setup, computation, and reporting, which is well suited to optimization or variant studies.
By centralizing geometry, simulation models, and results in a shared environment, it ensures data consistency and traceability.
Ansys EnSight
CFD, thermal, mechanical, electromagnetic, acoustic, or multiphysics data. Ansys EnSight reads most native formats on the market.
Yes. It supports more than 50 formats, covering the leading commercial and open-source solvers on the market.
Yes. Ansys EnSight offers a full Python API to automate post-processing, generate reports, and standardize workflows.
Thanks to parallel processing and memory management, it can visualize and animate datasets of several terabytes.
Yes. It produces high-resolution animations and photorealistic renderings for technical communication.
DEP MeshWorks
No. It complements them by allowing you to modify and optimize finite element models directly, without going through the CAD geometry.
MeshWorks is compatible with most solvers on the market, including LS-DYNA, which allows integration into existing processes.
Yes. MeshWorks lets you record, customize, and automate workflows without coding, which makes it easier to standardize best practices.
Oasys Suite
Yes. It is specifically designed for LS-DYNA and ensures full compatibility with its file formats, keywords, and solver developments.
Primer, D3PLOT, T/HIS, and REPORTER, covering the entire simulation cycle from model preparation to final documentation.
Yes. The suite supports the creation of scripts and macros to automate repetitive tasks, report generation, or custom post-processing.
Yes. It is optimized for large-scale models containing several million elements.
Yes. The Oasys tools support all of LS-DYNA's multiphysics solvers: crash, forming, fluid-structure interaction, thermal, and electromagnetics.
Oasys Primer
Yes. It is designed for LS-DYNA and ensures compatibility with all of the solver's keywords, formats, and versions.
Yes. Primer supports automation through JavaScript and Python APIs, enabling you to create scripts and macros and standardize repetitive operations.
Yes. More than 9,000 built-in checks identify missing properties, invalid contacts, or configuration errors before the solver runs.
Yes. Primer is optimized for complex models with multiple INCLUDE files, featuring advanced label management and visualization of large assemblies.
Primer is directly connected to D3PLOT, T/HIS, and REPORTER, ensuring a continuous workflow from model preparation to final reporting.
Oasys D3PLOT
Yes. It is designed for LS-DYNA and supports all of its native output formats and files.
Yes. It is optimized for visualizing models containing several million elements, with fast loading and smooth navigation.
Yes. D3PLOT lets you load several result sets simultaneously to overlay, synchronize, or visually compare them.
Yes. It generates animations and exports high-quality videos or images for reports and presentations.
D3PLOT works with T/HIS for curve analysis and with REPORTER for automatic report generation.
Oasys REPORTER
Yes. It is designed for LS-DYNA and integrates with the Oasys suite to automatically extract results, charts, and animations.
Yes. REPORTER offers full template customization: logos, colors, headers, footers, and content organization.
Yes. It automatically inserts images, time-history curves, and animations exported from D3PLOT.
Yes. Reports can be refreshed to automatically incorporate new results, plots, and images.
PDF, Microsoft Word, and HTML.
Modèles LSTC mannequins et impacteurs
Yes. The LSTC dummies, impactor heads, and impactors are available free of charge to users with an LS-DYNA license. Contact Dynas+ to access them.
FAST models are lightweight and offer reduced computation time while maintaining good overall correlation. Detailed models represent all internal components for maximum accuracy. Rigid-FE models are optimized for kinematic or structural analyses.
Yes. All models are validated by comparison with real test data to ensure fidelity to the behaviors observed in the laboratory.
Yes. They comply with the UN R127 standard and Euro NCAP protocols and are updated in line with changes in safety standards.
No. They are designed and optimized exclusively for LS-DYNA, whose contact formulations, material laws, and algorithms they leverage.
Modèles LSTC de barrières
Yes. They are provided free of charge to users with an LS-DYNA license and are obtained through Dynas+.
Solid-element models are lighter and faster to run, making them suitable for large global simulations. Shell models offer better local accuracy for detailed deformation analysis.
Yes. All models are validated according to official procedures, including FMVSS 214, Euro NCAP, and ECE-R95, and reproduce the stiffness and energy absorption of physical barriers.
Yes. Material properties, thicknesses, or constraints can be modified to represent particular experimental conditions or research scenarios.
Yes. Ongoing maintenance keeps them aligned with changes in NCAP standards and international regulations.
Modèles LSTC de pneus
Yes. They are available free of charge to all licensed LS-DYNA users and are obtained through Dynas+.
They are optimized for crash and impact simulations, notably offset frontal and side impacts, where tire deformation influences the structure and energy absorption.
No, not in the current version. The goal is to reproduce deformation and contact under high compression, without modeling material failure.
Yes. The inflation pressure is defined by the user, and leakage effects can be simulated using vent and porosity features.
Yes. Each model has been experimentally validated using material tests, component-level tests, and full-vehicle crash simulations.
Modèles ARUP Cellbond de barrières
No. The ARUP Cellbond models are available under a commercial license and are acquired through Dynas+.
Each model is validated through detailed dynamic testing and correlated against both component-level tests and full-scale crash tests.
They are designed in accordance with the leading international standards, including Euro NCAP, IIHS, FMVSS, NHTSA, and C-NCAP.
Yes. They integrate with Oasys Primer, D3PLOT, and REPORTER, enabling consistent model preparation, visualization, and report generation.
Licensed users benefit from complete documentation, regular updates, and technical support provided by Dynas+ and ARUP.
Modèles ARUP têtes et jambes
Yes. They are developed specifically for LS-DYNA and compatible with its solver environment, contact definitions, and material formulations.
Yes. The head and leg models are validated and aligned with the Euro NCAP, UN R127, and Regulation (EC) 631/2009 protocols for pedestrian impact testing.
The upper leg model assesses thigh and pelvis injuries during an impact on the hood edge. The lower leg model analyzes knee and tibia injuries caused by impacts on the bumper.
No. They are not intended to replace physical testing but to complement it, enabling early virtual validation and optimization before certification testing.
Yes. ARUP continuously updates its models to reflect the latest testing standards, biomechanical data, and advances in material characterization.
Ansys Discovery Modeling
No. It is not a comprehensive parametric design tool. It complements traditional CAD solutions by offering speed, flexibility, and direct editing of imported models.
Yes. This is one of its main uses: cleaning up, simplifying, and repairing models before CFD, thermal, or structural simulation.
It natively reads and writes the leading standard formats, including STEP, IGES, Parasolid, and ACIS, as well as the formats of the major CAD packages on the market.
Yes. The model's dimensions can be defined as parameters, allowing them to be varied and used to run parametric studies or design of experiments.
No. The interface lets any engineer model, explore, and adjust complex geometries without lengthy training or a parametric history.
Ansys Lumerical
Ansys Lumerical covers a wide range of photonic applications: waveguides, optical fibers, lasers, modulators, photodetectors, micro-LEDs, metasurfaces and photonic integrated circuits (PICs). Its solutions are used in particular in optical telecommunications, semiconductors, sensors, imaging and quantum photonics.
Lumerical FDTD simulates the electromagnetic interactions between light and complex photonic structures using 3D solving methods. Lumerical MODE is more specialized in modal analysis and guided propagation, in particular for waveguides, fibers and optical couplers. The choice mainly depends on the geometry, the phenomena being studied and the propagation scales involved.
Lumerical FDTD integrates several complementary methods. The FDTD solver models electromagnetic interactions in complex geometries, while RCWA is particularly well suited to periodic structures, including diffraction gratings and metasurfaces. The STACK solver efficiently analyzes reflection, transmission and absorption in thin-film stacks.
Yes. Ansys Lumerical Multiphysics couples electromagnetic, electrical, thermal and quantum phenomena using specialized solvers such as CHARGE, HEAT, DGTD, FEEM and MQW. These capabilities make it possible to study electro-optic, thermo-optic and self-heating effects in lasers, modulators, photodetectors and other optoelectronic components.
Ansys Lumerical INTERCONNECT is used to design and simulate photonic integrated circuits (PICs) from compact models representing the individual components. Its time-domain and frequency-domain solvers analyze the overall behavior of circuits, their interactions and their performance. It also supports electronic-photonic co-design and the simulation of quantum photonic circuits.
Compact models represent the behavior of photonic components without having to systematically recompute their detailed physics. Lumerical CML Compiler generates and validates these models from simulations or experimental measurements, then builds libraries that can be integrated into PDKs (Process Design Kits). These libraries make it easier to design, reuse and simulate photonic circuits.
The choice depends on the physical phenomena to be modeled and the simulation scale. FDTD and MODE are dedicated to characterizing photonic components, Multiphysics to interactions between different physics, INTERCONNECT to simulating integrated circuits, and CML Compiler to building compact model libraries. The Dynas+ teams can help you identify the solutions suited to your needs.
Ansys Speos
Ansys Speos can be used to design and analyze a wide variety of optical systems: automotive lighting, headlamps and signal lights, interior lighting, head-up displays (HUD), cameras, LiDAR sensors and imaging devices. It also covers industrial lighting, aerospace, consumer electronics and medical device applications.
Ansys Zemax OpticStudio is primarily dedicated to the design and optimization of optical systems, in particular lenses and imaging systems. Ansys Speos focuses more on simulating light propagation and evaluating optical and visual performance in realistic 3D environments. The two products offer complementary capabilities, from component design to integration into a complete system.
Yes. Speos includes human vision models to assess color perception, contrast, brightness adaptation and glare. Combined with photorealistic rendering and immersive visualization, these features make it possible to anticipate visual comfort and product appearance under real conditions of use.
Yes. Speos can be integrated into multiphysics simulation chains involving, among others, Ansys Mechanical and thermal analysis tools. These interactions make it possible to assess the influence of structural deformation and temperature variations on optical performance. Speos can also be used alongside Zemax OpticStudio to link optical design with the analysis of the system in its operating environment.
Ansys Zemax OpticStudio
Ansys Zemax OpticStudio can be used to design and optimize a wide variety of optical systems: camera lenses, imaging systems, telescopes, microscopes, lenses, laser systems and illumination devices. It covers applications in aerospace, space, automotive, medical imaging and consumer electronics, among others.
Sequential ray tracing follows a predefined order of optical surfaces. It is particularly well suited to the design and optimization of imaging systems. Non-sequential mode allows rays to interact freely with surfaces, including multiple reflections, refraction and scattering. It is used for illumination systems, complex geometries and stray light analysis.
Zemax OpticStudio provides tolerancing tools to study the influence of geometric variations, positioning errors and assembly errors on optical performance. Sensitivity analyses and Monte Carlo simulations make it possible to statistically assess the robustness of designs, identify critical parameters and define tolerances compatible with performance targets and manufacturing constraints.
Yes. Zemax OpticStudio can be combined with Ansys mechanical and thermal simulation solutions to assess the influence of temperature variations, structural deformation and component displacement on optical performance. These opto-mechanical analyses make it possible to anticipate image quality degradation and verify the robustness of systems under their operating conditions.
Zemax OpticStudio is primarily intended for the design, optimization and tolerancing of optical systems, in particular for precision imaging applications. Speos focuses more on simulating light propagation in realistic 3D environments, with advanced handling of visual perception and sensors. The two solutions are complementary, from the design of optical components to the evaluation of their performance in a complete system.
Services
Fixed-price or on-site studies, technical support, consulting and audit, custom developments, HPC computing and training. We cover the entire simulation chain.
Both. Our services take place at our offices or at your site, depending on the need and the confidentiality of the project.
LS-DYNA, our specialty, the Ansys suite, DEP MeshWorks and the Oasys suite. Our engineers have deep expertise in these environments.
A conversation with an engineer helps scope your need, then we propose the right service: fixed-price, staff augmentation, support or training.
Training
For French companies, yes in most cases, under the skills development plan. We provide the programme, quote, agreement and certificate of attendance required for the application.
Yes, as a tailored course: content, examples and exercises are adapted to your context, at your premises or ours.
In-house and tailored courses can be delivered online when the content allows. We favour classroom training for courses with computer exercises.
Mainly the Dynas+ engineers who run the analyses and provide support. A few courses are taught by leading external experts. The trainer’s name is shown on each course sheet.
Public sessions: registration up to one week before the session. In-house or tailored: the date is agreed together based on your availability, after acceptance of the proposal.
Sessions taught by Dynas+ go ahead. Sessions taught by an external expert may be cancelled with two weeks’ notice.
Calcul HPC
Yes, absolutely. We support you starting from the needs-definition phase, taking into account your simulation tools, your computational volumes, and your IT environment. You benefit from clear technical recommendations and a realistic, performance-focused approach.
Yes. Dynas+ is also an HPC hardware reseller. We can offer you a complete solution, from specification to supply and then commissioning of your cluster.
Yes. Dynas+ handles the entire commissioning: installation, configuration, solver tuning, load-testing, and validation of operation.
No. We work mainly within the LS-DYNA, Ansys, Oasys, and partner-tool ecosystem, but we can also adapt HPC environments to other solvers or computation chains according to your needs.
Yes, we can set up long-term technical follow-up, with monitoring, periodic audits, parameter updates, or support in the event of increased load or software upgrades.
Both are possible, and they can be combined. If you need resources on site, we specify and supply your workstations or cluster through our Dell partnership, then install and optimise them for your solvers. If on-premise resources are not a necessity, we help you move to the Qarnot HPC cloud, pay-per-use or reserved, with no IT skills required. One of these answers, two, or a mix of all three: we build with you the combination that fits your computing load and your budget.
Yes. We help you move to the Qarnot HPC cloud: a European platform designed for CAE engineers. You run your LS-DYNA and Ansys Fluent simulations there pay-per-use or reserved, with no IT skills required.
By using a low-carbon HPC cloud. The servers of the Qarnot HPC cloud heat buildings with their recovered heat: up to 80% less CO2 on your LS-DYNA and Ansys Fluent simulations. We help you run your computations there, pay-per-use or reserved.
Conseil et audit
When you want expert input to guide your technical choices, validate a methodology, overcome a technical roadblock, or optimize your simulation practices.
Yes. Depending on the nature of the need, an engagement can range from a few hours of targeted expertise to several days of support.
Yes. Many consulting services can be delivered remotely through collaborative working sessions and secure sharing of your models.
Yes. We carry out technical audits of models, methodologies, and workflows to identify areas for improvement, potential risks, and possible optimizations.
Our expertise mainly covers ANSYS solutions (LS-DYNA, Mechanical, Fluent, etc.), Oasys, and DEP MeshWorks, but our recommendations are based above all on the principles of numerical simulation and can apply to multi-tool environments.
Depending on your needs, we can provide an audit report, technical recommendations, a methodology, an action plan, or personalized support to help your teams implement the proposed solutions.
Développements
Yes. Our long-standing expertise is rooted in developing user features within LS-DYNA (materials, contacts, loads, etc.), but we also work more broadly through the development of custom tools in Python and the implementation of automated processes in DEP MeshWorks, in particular for simulation chains or morphing operations.
Absolutely. We build targeted scripts or domain-specific tools to automate the repetitive steps of pre-processing, computation, or post-processing, including report generation, data formatting, and file conversion.
Yes. Our developments are fully tailored to your working environment: input data, file structure, IT constraints, quality requirements, and so on. We factor in your specific requirements from the design phase onward.
Yes. We can create ergonomic, easy-to-use interfaces integrated into your processes, allowing your teams to launch complex processing without advanced scripting knowledge.
Yes. Our solutions are designed to be maintainable and scalable, with clear documentation, structured code, and the option of long-term support.
Partenariat R&I
When standard models are no longer enough: multiphysics coupling, critical simulations, integration of complex tests, or difficult validation. We develop tailored, validated methodologies that are ready to apply in an industrial environment.
LS-DYNA is our primary foundation, which we leverage across all of its technological building blocks. We can combine it with other codes or develop complementary tools when the context calls for it. This flexibility, combined with our cross-industry approach, allows us to build on proven methods, transfer them from one field to another, or explore new solutions in order to draw on a broader range of options when facing complex challenges.
Yes, as part of collaborative projects (public or private funding), methodological transfers, or advanced studies.
Some of our results are shared at leading conferences: LS-DYNA User Forum, NAFEMS, PATRAM, ECSSMET, AIAA, and more. Most of our publications are available here.
Support technique
We provide technical support for all the software in our portfolio: LS-DYNA, the Ansys Suite (structures, fluids, electronics, multiphysics), DEP MeshWorks, and the Oasys Suite. Our team has deep expertise in these environments.
Your request is handled by an experienced Dynas+ engineer who is also involved in our engineering and training activities.
Each product is additionally overseen by an expert technical lead who guarantees the quality of the answers and ongoing follow-up.
You can reach us through:
📧 support@dynasplus.com
📞 +33 (0)5 61 44 54 98
We are committed to providing a fast, qualified response, with a first reply generally within 48 business hours. Critical cases are prioritized.
There is no limit on the number of requests a client can submit to us.
Technical support is provided in French and/or English.
Études et expertise
Our engineers cover a broad spectrum of physical phenomena: structural mechanics, fast dynamics, thermal, thermomechanical, crash, impact, electromagnetics, advanced fluid-structure coupling, and multiphysics. We adapt our methods to the complexity of your challenges.
Absolutely. We support our clients on high-value projects, including methodology development, exploration of new processes (hydrogen, batteries, additive manufacturing, etc.), and the formalization of innovative workflows.
Our studies do not stop at producing numerical results: we provide critical analysis, technical recommendations, and genuine engineering insight. Every deliverable is designed to be usable, understandable, and geared toward decision-making.
Yes. Our engineers are used to dealing with cases that carry high technical or regulatory stakes. Thanks to our command of multiphysics phenomena and a rigorous approach, we can model difficult situations, validate assumptions, and help reduce project risk.
Yes. We can ensure the full transfer of models, methods, and best practices, train your teams if needed, and even create custom tools to build on the results. Our goal is for the study to be an operational springboard, not an end in itself.

Can't find your answer?
An unanswered question? Our engineers will get back to you directly
