
FINITE ELEMENT MODELS
LSTC barrier models
This library of finite element barrier models replicates the behavior of the physical barriers used in regulatory crash tests, to reliably simulate side, frontal, or oblique impacts and prepare for certification campaigns.
Overview
LSTC barrier models at a glance
Side impact
The models replicate the side impact barriers used by reference bodies, including deformable honeycomb structures and the associated calibration curves.
Frontal and oblique impact
Designed for frontal and oblique tests, these models reproduce the geometries, stiffnesses, and crush characteristics of the physical barriers, to assess structural compatibility and energy absorption.
Low-speed and rear impact
Additional models cover low-speed and rear impacts, to verify the integrity of the vehicle structure and fuel systems.
Key capabilities
The models in detail
- Side impact barriers: FMVSS 214, IIHS, IIHS 2.0, ECE-R95, European Advanced barrier
- Frontal impact barriers: Offset Deformable Barrier, oblique and small-overlap barrier
- Mobile Progressive Deformable Barrier for mobile frontal tests
- RCAR bumper barrier for low-speed impacts
- FMVSS 301 mobile offset barrier for rear impacts
- Shell-element or solid-element versions depending on the level of detail required
- Preconfigured models with suitable contacts, materials, and boundary conditions
- Regular revisions following changes in test protocols

WHY
The value for your team
The models are correlated with data and procedures from certified physical tests, and aligned with the international standards FMVSS, IIHS, ECE-R95, and Euro NCAP. Available in shell or solid versions, they adapt to both the required level of detail and computation-time constraints.

Let's discuss your project
Book a meeting with our simulation experts for a full audit
FAQ
A question?
We have the answer
Yes. They are provided free of charge to users with an LS-DYNA license and are obtained through Dynas+.
Solid-element models are lighter and faster to run, making them suitable for large global simulations. Shell models offer better local accuracy for detailed deformation analysis.
Yes. All models are validated according to official procedures, including FMVSS 214, Euro NCAP, and ECE-R95, and reproduce the stiffness and energy absorption of physical barriers.
Yes. Material properties, thicknesses, or constraints can be modified to represent particular experimental conditions or research scenarios.
Yes. Ongoing maintenance keeps them aligned with changes in NCAP standards and international regulations.
See also

