Dynas+
LSTC tire models

FINITE ELEMENT MODELS

LSTC tire models

These detailed finite element models replicate tire deformation under extreme conditions, particularly in offset frontal impacts where tire compression and contact behavior strongly influence vehicle dynamics.

Overview

LSTC tire models at a glance

Fine-grained modeling

Meshed from 2D CAD section data and made up of 8-node hexahedral elements, each model has more than 240,000 elements to reproduce deformation and contact behavior under dynamic loads.

Inflation, venting, leakage

The models incorporate realistic pressurization and venting systems, making it possible to simulate inflation, deflation, and leakage through porosity mechanisms. Pressure is user-defined.

Nine sizes available

From P155-65-R14 to P305-35-R20, the library covers compact-vehicle, SUV, and sports-vehicle tires, to fit a range of vehicle architectures.

Key capabilities

The models in detail

  • 8-node hexahedral element mesh across all main components
  • Elastomers modeled with the solver's simplified rubber law
  • Plies and reinforcements in an orthotropic elastic law to reproduce anisotropic stiffness
  • Pressurization and venting systems for inflation, deflation, and leakage
  • Nine tire sizes, from compact to sports vehicle
  • More than 240,000 elements per model
  • Direct compatibility with the solver, with no additional contact definition
  • Validation through material tests, component-scale tests, and full-vehicle crash simulations

WHY

The value for your team

The models are derived from a campaign of material tests, checks, and component-scale tests, ensuring physical consistency and reliable results. The modeling of materials, inflation, and leakage delivers a realistic tire response under impact conditions, without requiring additional contact definitions for the tire-vehicle interaction.

Let's discuss your project

Book a meeting with our simulation experts for a full audit

FAQ

A question?
We have the answer

Yes. They are available free of charge to all licensed LS-DYNA users and are obtained through Dynas+.

They are optimized for crash and impact simulations, notably offset frontal and side impacts, where tire deformation influences the structure and energy absorption.

No, not in the current version. The goal is to reproduce deformation and contact under high compression, without modeling material failure.

Yes. The inflation pressure is defined by the user, and leakage effects can be simulated using vent and porosity features.

Yes. Each model has been experimentally validated using material tests, component-level tests, and full-vehicle crash simulations.