Dynas+

Innovation project

VANESSES

Making laser inspection of composite assemblies reliable

1 min read
Industry
Aeronautics
In partnership with
VANESSES

The project

A RAPID project funded by the DGA, in partnership with RESCOLL and the PIMM laboratory (ENSAM/CNRS). In modern aerospace, structural bonding is gradually replacing riveting: lighter, faster, more discreet. One critical hurdle remains: guaranteeing the quality of a bonded joint without dismantling everything. The answer: LASAT (Laser Shock Adhesion Test), a nondestructive method that uses laser-generated shock waves to probe the adhesion of a bonded interface, at depth, without altering it.

The challenge

LASAT works and has proven its effectiveness in the lab. But to scale up to industrial use, it lacks one tool: a robust, calibrated simulator capable of predicting, material by material, the right laser settings to apply — without trial and error, and without requiring simulation expertise.

The VANESSES approach

The project met this challenge with a twofold objective:

  • Accurately simulate the dynamic response of composite materials (unidirectional CFRP) subjected to laser impact
  • Automate the calibration of LASAT shots to reach a target stress at a given depth

To do so, the team:

  • developed high-fidelity finite element models incorporating strain rate and suitable damage laws
  • compared several interface modeling strategies (cohesive elements vs. tiebreak contact), retaining the most robust one for the shock wave
  • designed an automatic calibration tool to adjust the laser energy according to the target (geometry, material, depth)

The whole was experimentally correlated with more than 200 LASAT tests on aluminum and multilayer composites (up to 10 plies), on the Hephaïstos platform (PIMM) and with the support of RESCOLL.

Result

A direct bridge between simulation and testing, an automated setting tool ready for use on the shop floor, and a decisive step toward the industrialization of laser shock inspection.