Dynas+
BASE-03LS-DYNA and related toolsLS-DYNA Basics

Unified Introduction to LS-DYNA - Explicit and Implicit Solvers

Be able to perform and post-process the most common explicit and implicit analyses with LS-DYNA.

Learning objectives

  • Get started with the LS-PrePost interface.
  • Understand the concept of keywords and the steps for setting up an LS-DYNA model.
  • Be able to distinguish between the most common element formulations, choose the right one for a given application and use the appropriate options for each.
  • Understand the hourglass phenomenon and be able to identify and correct it.
  • Be able to distinguish between the main contacts, choose the right one and use the appropriate options.
  • Be able to set up a simulation with the appropriate modelling choices, and to check and analyse its results.
  • Be able to perform an implicit time-domain analysis and understand the differences with explicit analysis.
  • Master the options to use to ensure good convergence and physical representativeness.
  • Be able to perform and exploit a modal analysis, and understand which parameters must be modified.
  • Be able to perform an implicit/explicit switch and understand the implications for solution and time step.
  • Master the two possible methods for performing an implicit springback analysis.

Target audience

Design and simulation engineers wishing to perform LS-DYNA explicit and implicit analyses

Prerequisites

Basic knowledge of strength of materials and elasticity / continuum mechanics

Detailed programme

01Introduction
  • A brief history
  • Main features
  • Application examples
  • LS-PrePost 4.x
  • Important remarks
02General principles
  • Solving the equation of motion
  • Stable time step
03Keyword format
  • Keyword format
  • Keyword families
  • A few keywords to get started
  • LS-DYNA file organisation
04Elements in LS-DYNA
  • General information on elements
  • Element formulations
  • Hourglass
05Materials
  • General information
  • Elasto-plastic materials
  • Hyperelastic materials
  • Foams
  • Composite materials
  • Equations of state
  • Rigid bodies
06Contact management
  • General information on contacts
  • Contact detection methods
  • Contact enforcement methods
  • Contact families
  • Contact-related keywords
  • _MORTAR contacts
  • Contact post-processing
  • Rigid walls
07Modelling connections
  • Nodal rigid bodies
  • Spot weld modelling
  • Kinematic joints
  • Discrete elements
  • Other connections
08Outputs & model instrumentation
  • Outputs
  • History variables
  • Model instrumentation
  • CFILE
09Simulation checks
  • General information
  • Checks before launch
  • Checks at launch
  • Checks after launch
  • Improving model accuracy
10Simulation sequencing
  • Restarts
  • "dynain" file
  • Dynamic relaxation
11SMP & MPP simulations
  • General information
  • Specific features of the LS-DYNA SMP version
  • Specific features of the LS-DYNA MPP version
12Specific features of the implicit solver
  • General information
  • Activating the implicit solver
  • Linear static & nonlinear implicit analysis
  • Current capabilities of the implicit solver
  • Modal analysis
  • Implicit/explicit switch
  • Springback
  • Tips and tricks

Overview of LS-PrePost capabilities. The key points of the course will be accompanied by practical exercises.

Request a quote for this course

All courses