Dynas+
FOND-01Science and EngineeringScience and EngineeringTaught in English

Design of Protective Structures

Address a wide range of scientific and technical problems involved in mitigating the effects of severe blast, shock and impact loading.

Learning objectives

  • List the various types of charges.
  • Understand how a charge works and anticipate its effect on/in structures according to various parameters (TNT equivalent, open-air/confined environment, venting paths).
  • Learn to use calculation tools such as CONWEP.
  • Understand the phenomena involved in buried explosions.
  • Incorporate structural design methods for blast/impact resistance.

Target audience

Engineers or PhDs involved in the design or assessment of structures providing protection against malicious acts.

Prerequisites

Mechanical engineering background, preferably with some knowledge of civil engineering and of blast/shock/impact.

Detailed programme

01Introduction
  • General background
  • Protective measures planning and design philosophy
  • Protection methods, threat and risk assessment
  • From the threat environment to load definition
  • Analysis requirements and associated resources
  • Protective technologies – Current state and future needs
  • Summary
02User options principle
  • Introduction
  • Characteristics of explosive processes, materials and environments
  • Explosives, explosions, their consequences and mitigation
  • Examples and applications
  • Summary
03Conventional and nuclear weapons
  • Introduction
  • Blast effects
  • Penetration
  • Cratering, ejecta and ground shock from high explosives
  • Cratering, ejecta and ground shock from nuclear devices
  • Fragmentation
  • Fire, chemical, biological and radiological environments
  • Examples and applications
  • Summary
04Conventional and nuclear loads on structures
  • Conventional structural loads
  • Nuclear structural loads
  • Step-by-step procedures
  • Summary
05Behaviour of structural elements
  • Introduction
  • Material properties of steel and concrete
  • Flexural resistance
  • Shear resistance
  • Tension and compression
  • Principal reinforcement
  • Cylinders, arches and domes
  • Shear walls
  • Frames/framing
  • Natural periods of vibration
  • Advanced considerations
  • Application to structural design
  • Threshold responses and damage
  • Examples and applications
  • Summary
06Dynamic response and analysis
  • Introduction
  • Single-degree-of-freedom analysis
  • Multi-degree-of-freedom systems
  • Continuous systems
  • Intermediate and advanced computational approaches
  • Requirements and validation for computational capabilities
  • Computational support for protective design and analysis
  • Examples and applications
  • Summary
07Connections, openings, interfaces and in-structure shock
  • Connections
  • Openings and interfaces
  • In-structure shock and isolation
  • Internal pressure
  • Examples and applications
  • Summary
08Pressure/impulse diagrams and their applications
  • Introduction
  • Background
  • Characteristics of P/I diagrams
  • Analytical solution of P/I diagrams
  • Numerical approaches to P/I curves
  • Dynamic analysis approaches
  • Dynamic structural models
  • Application examples for single-degree-of-freedom analysis and computational P/I approaches
  • Examples and applications
  • Summary
09Behaviour of structural elements
  • Introduction
  • Background
  • Progressive collapse of various types of structures
  • DoD and GSA guidelines
  • Foreign guidelines
  • Advanced analysis of supporting structures/frames
  • Examples and case studies
  • Summary
10A comprehensive approach to protective structure design
  • Introduction
  • Background
  • Planning and design assumptions
  • Geographical, architectural and functional considerations
  • Load considerations
  • Structural behaviour and performance
  • Behaviour of structural systems
  • Selection of structural systems and components
  • Multi-hazard protection model
  • Other security considerations
  • Developing and implementing effective protective technology
  • Summary

Course delivered in English, course materials in English. As the course is taught by an external expert, Dynas+ reserves the right to cancel it with 2 weeks' notice if there are not enough registrations.

Request a quote for this course

All courses