Dynas+
MEC-01Other Ansys productsAnsys MechanicalNew

Introduction to ANSYS Mechanical

Know how to use Mechanical to run standard FEA analyses and post-process them.

Learning objectives

  • Get to grips with the Mechanical (Workbench) interface.
  • Acquire best practices for preparing and meshing geometries.
  • Be able to set up an analysis by making the appropriate modelling choices.
  • Be able to carry out any linear static analysis.
  • Understand the limits of linear analysis.
  • Be able to carry out a simple modal or thermal analysis.
  • Know how to validate a simulation from a physical and numerical standpoint.
  • Be able to post-process simulation results to determine the required quantities and data.

Target audience

Design office and analysis engineers wishing to carry out structural analyses with ANSYS Mechanical.

Prerequisites

Basic knowledge of solid mechanics, strength of materials and elasticity.

Detailed programme

01Introduction
  • A little history
  • Main features
  • Application examples
  • Important remarks
02General principles – theoretical review
  • Solving the equations of motion (linear)
  • Finite element method (FEA)
  • Implicit scheme, concept of time step
03Mechanical user interface in Workbench
  • Workflow – Box – Components – Analysis systems
  • Overview of the toolbox
  • Overview of a basic workflow
04Model preparation with Discovery
  • Differences between SpaceClaim and Discovery
  • Discovering and getting to grips with the interface
  • Sketch mode vs Design mode
  • Drawing and design, preparation and repair tools
  • CAD preparation best practices
05Meshing with ANSYS Workbench Meshing
  • Overview of the various mesh types
  • General meshing settings (surface, volume)
  • Local mesh control (sizing, refinement, conformity…)
  • Multi-body meshes – Assemblies – Topology
  • Checking mesh quality
06Materials
  • Defining a material law
  • Common material laws
  • Managing and assigning a material law
07Bonded contacts
  • Modelling strategy (conformal mesh, bonded contact, rigid connection)
  • Specific features of the various bonded contacts
  • Defining a bonded contact
08Loads and boundary conditions
  • Load types
  • Boundary condition types
  • Choosing loads/BCs correctly
09Linear static analysis
  • Setting up a linear static analysis
  • Simulation monitoring
  • Best practices – Tips and tricks
10Post-processing
  • Checking the validity of the analysis
  • Choosing and configuring outputs
  • Creating graphical outputs
  • Creating “Trackers”
  • Creating charts
11Introduction to modal analysis
  • Specific features of modal analysis
  • Setting up and computing natural modes
  • Specific post-processing
12Introduction to thermal analysis
  • Specific loads and BCs
  • Model setup and configuration
  • Heat balance and validation of analyses
  • Thermomechanical coupling
13Introduction to nonlinearities
  • Types of nonlinearity (geometric, material, contact)
  • When should nonlinearities be taken into account?
  • Configuration and model setup specifics
  • Solution strategies
14Going further
  • Using ANSYS online resources
  • Chaining and parameterising analyses with Workbench
  • Overview of features and models not covered during the course

Presentation of the capabilities of Mechanical. The key points of the course will be accompanied by practical exercises.

Request a quote for this course

All courses