Dynas+
AVAN-03LS-DYNA and related toolsLS-DYNA Advanced

Connection Modeling

Explore in depth the options available for modelling connections in LS-DYNA

Learning objectives

  • Distinguish between kinematic joints (with or without stiffness) and between the different types of discrete elements, choose the right ones for a given application and use the appropriate options for each (coordinate system updates, zero-length elements).
  • Understand the different types of modelling for threaded fasteners (beam / solid), initialise preload stresses and handle clearance holes, choose the appropriate modelling for a given application and use the appropriate options.
  • Understand the different types of spot weld modelling (rigid / beam / solid), handle the connection to the structure and failure, choose the appropriate modelling for a given application and use the appropriate options.
  • Understand the different types of adhesive modelling (tiebreak contact / cohesive elements), handle the connection to the structure and failure, choose the appropriate modelling for a given application and use the appropriate options.

Target audience

Design and simulation engineers wishing to deepen their knowledge of LS-DYNA connection models

Prerequisites

Working knowledge of LS-DYNA (prior attendance of BASE-01 or BASE-03 recommended)

Detailed programme

01Introduction
  • History & overview
02Kinematic & discrete connections
  • Kinematic joints
    • Joints via *CONSTRAINED_JOINT_Option
    • Joints via *CONSTRAINED_JOINT_STIFFNESS_Option
  • Discrete connections
    • Connections via *ELEMENT_DISCRETE
    • Connections via 6-DOF springs
    • Associated materials
  • Post-processing
03Threaded fastener assemblies
  • Simplified approaches
    • Coincident mesh
    • Modelling with rigid elements
  • Detailed approaches
    • Introduction
    • Choice of the equivalent bolt cross-section
    • Modelling with beams
    • Modelling with deformable solids
  • Pretensioning techniques
    • Overview
    • Direct initialisation of the force in beams
    • Direct initialisation of the stress in solids
    • Thermal approach
    • Interference contact
  • Failure management in bolted connections
04Spot welds
  • Rigid modelling
    • Approach without failure
    • Approach with failure
  • Deformable modelling
    • Modelling with beams
    • Modelling with solids
    • Associated materials with failure
    • Post-processing
  • Advanced modelling
    • « Multi-scale » spot welds
    • Pre- & post-processing
05Adhesive bonded assemblies
  • Simplified adhesive modelling
    • Simplified approaches
    • Overview of tied contacts
  • Detailed adhesive modelling
    • Connection via tied contact with failure
    • Connection via cohesive elements

06Conclusion

The key points of the course will be illustrated with practical exercises.

Request a quote for this course

All courses