METI-01LS-DYNA and related toolsLS-DYNA Industry applications
Introduction to LS-DYNA - Sheet Metal Forming
Be able to run and post-process forming simulations in the LS-PrePost environment with the LS-DYNA solver
Learning objectives
- Get to grips with the LS-PrePost interface.
- Understand the concept of keywords and the steps involved in setting up an LS-DYNA model.
- Distinguish between the most common element formulations, choose the right one for a given application and use the appropriate options for each.
- Understand the hourglass phenomenon, and know how to identify and correct it.
- Distinguish between the main contacts, including those specific to forming models, choose the right one and use the appropriate options.
- Be able to set up a calculation with the appropriate modelling choices, and check and analyse its results.
- Know how to perform an implicit transient analysis and understand the differences with explicit.
- Assimilate the options to use to ensure good convergence and physical representativeness.
- Master the two possible methods for performing an implicit springback analysis.
- Know how to perform an implicit dynamic analysis for the static initialisation of blanks.
Target audience
Design and simulation engineers wishing to carry out forming simulations with LS-DYNA
Prerequisites
Basic knowledge of strength of materials and elasticity / continuum mechanics
Detailed programme
01Introduction
- A little history
- Main features
- Application examples
- LS-PrePost 4
- Important remarks
02General principles
- Solving the equation of motion
- Time step
- Mass scaling
03Keyword format
- Keyword format
- Keyword families
- A few keywords to get started
- Organisation of LS-DYNA files
04Elements in LS-DYNA
- Overview of elements
- Element formulations
- Hourglass
- Adaptive meshing
05Material behaviour
- Overview of element formulations
- Elasto-plastic materials
- « Forming »-specific materials
- Rigid bodies
06Contact management
- Overview of contacts
- Contact detection methods
- Contact enforcement methods
- Contact families
- Contact-related keywords
- _MORTAR contacts
- Contact post-processing
- « Forming »-specific options
- Rigid walls
07Boundary conditions and loading
- Boundary conditions
- Loading
- Nodal rigid bodies
- Spot weld modelling
- Kinematic joints
- Discrete elements
08Model outputs and instrumentation
- Outputs
- History variables
- Model instrumentation
- CFILE
09Chaining calculations
- Restarts
- « dynain » files
- Dynamic relaxation
10« Forming »-specific options
- Multi-step simulations
- Drawbead modelling
- Trimming
- Tailor-welded blanks
- Hydroforming
11Calculation checking
- Overview
- Checks before launch
- Checks at launch
- Checks after launch
- Improving model accuracy
12SMP & MPP calculations
- Overview
- LS-DYNA SMP version specifics
- LS-DYNA MPP version specifics
13Implicit solver specifics
- Overview
- Activating the implicit solver
- Linear static implicit analysis
- Nonlinear implicit analysis
- Current capabilities of the implicit solver
- Modal analysis
- Implicit / explicit switching
- Static initialisation
- Springback
- Summary
The key points of the course will be illustrated with practical exercises.
