Dynas+

Case studies

Advanced modeling of balsa wood for energy absorption

1 min read
Industry
Nuclear
Disciplines
MaterialsNuclear safety
Technologies
LS-DYNA · LS-PrePost · LS-OPT
In partnership with
CEA CESTA
Advanced balsa wood modeling for energy absorption

The case

In partnership with CEA CESTA, Dynas+ took part in developing a methodology for modeling the balsa wood used as an energy absorber in radioactive material transport packages. The goal was to improve the numerical representation of balsa behavior by accounting for its specific mechanical characteristics (anisotropy, strain hardening, densification, strain-rate effects) in order to obtain simulations more representative of regulatory drop tests.

The solution deployed

Dynas+ compared several material laws available in LS-DYNA in order to identify the one best suited to modeling balsa wood. The methodology developed includes:

  • an experimental characterization campaign of the material in tension, compression, and shear along the different wood directions;
  • a comparative evaluation of the MAT_HONEYCOMB (MAT_026), MAT_MODIFIED_HONEYCOMB (MAT_126), and MAT_WOOD (MAT_143) laws;
  • validation of the models on representative tests (Brazilian tests and punching tests);
  • integration of the optimized material law into a complete nuclear package model in order to evaluate its influence on the overall simulation performance.
Advanced balsa wood modeling for energy absorption, the solution deployed

The results achieved

The study identified MAT_MODIFIED_HONEYCOMB (MAT_126) as the material law best suited to representing the behavior of balsa wood in nuclear package drop simulations. This approach makes it possible in particular to:

  • better reproduce the material's anisotropic behavior and strain-rate effects;
  • improve correlation with experimental tests, with a deviation of less than 1% on the crushed width in Brazilian tests, compared with about 9% using the historically employed law;
  • integrate a more representative material law into industrial nuclear package models while maintaining consistent results at the full-system scale.

This work was the subject of a scientific paper presented at the 13th International LS-DYNA Users Conference (Detroit): "Comparative Study of Material Laws Available in LS-DYNA to Improve the Modeling of Balsa Wood" (Teddy Maillot, Vincent Lapoujade, Edith Grippon, Bernard Toson, Nathalie Bardon, Jean-Jacques Pesque).

Advanced balsa wood modeling for energy absorption, the results achieved