
The case
The solution deployed
Dynas+ developed a computational methodology based on the successive use of several ALE models linked by the new Mapping technique. This approach consists of performing the initiation of the explosion on a very fine mesh in order to accurately capture the first instants of the detonation, then automatically transferring the state of the computation to progressively coarser meshes in order to extend the simulated domain while limiting computation costs. A complete evaluation campaign was carried out to characterize the influence of the mesh ratios on the conservation of pressure peaks, impulses, and transported energy, before comparing the results obtained with experimental measurements from air blast tests.

The results achieved
The work demonstrated that the Mapping technique makes it possible to preserve an excellent level of accuracy while sharply reducing computation times. The validation campaign showed in particular:
- an error of less than 10% on the overpressure peaks for the configurations studied;
- an error that can fall below 5% on certain sensors compared with the experimental tests;
- satisfactory conservation of the transported energy for suitable mesh ratios;
- computation times reduced from more than an hour to less than a minute depending on the Mapping strategy selected.
This work was the subject of a scientific paper presented at the 11th International LS-DYNA Users Conference (Detroit): "A Study of Mapping Technique for Air Blast Modeling" (Vincent Lapoujade, Nicolas Van Dorsselaer, Sandrine Kevorkian, Karine Cheval).








